ZKTECO SILKFP-101TA Access Control Terminal
13,900.00৳
In stock
- Fingerprint time attendance terminal with SilkID sensor
- 3,000 fingerprints, 10,000 EM cards, 100,000 records
- Reads wet, dry and rough fingers accurately
- 2.8" TFT screen; TCP/IP and USB host/client
- Sensor switches on only when a finger is detected
ZKTeco SilkFP-101TA একটি ফিঙ্গারপ্রিন্ট ও কার্ড হাজিরা যন্ত্র। এর SilkID সেন্সর ভেজা, শুকনো বা খসখসে আঙুলও দ্রুত চিনতে পারে। এতে ৩,০০০ আঙুলের ছাপ, ১০,০০০ কার্ড ও ১,০০,০০০ রেকর্ড রাখা যায়। অফিস, কারখানা ও স্কুলে কর্মীদের হাজিরা রাখার জন্য উপযোগী।
The ZKTeco SilkFP-101TA is a fingerprint time attendance terminal built around ZKTeco's SilkID sensor. It identifies wet, dry and rough fingerprints more reliably than standard optical sensors, which suits factories and outdoor workforces where fingers are often dirty or worn.
The terminal stores 3,000 fingerprints, 10,000 EM RFID cards and 100,000 attendance events, and staff can punch in by fingerprint, card or PIN. A 2.8-inch TFT screen guides each punch, and records are collected over TCP/IP or with a USB flash drive. Anti-reflective design and side lighting reduce interference during scanning, and the sensor stays off until a finger is detected to save power.
Standard functions include work codes, SMS, daylight saving, scheduled bell, self-service queries, photo ID and a built-in web server. It works with ZKTime.Net 3.0 software. Shelly International supplies the SilkFP-101TA in Bangladesh with attendance software setup and installation.
Specifications
| Model | SilkFP-101TA |
|---|---|
| Fingerprint sensor | SilkID |
| Algorithm | 3D Neuron fingerprint algorithm |
| Fingerprint capacity | 3,000 |
| Card capacity | 10,000 (EM RFID) |
| Record capacity | 100,000 |
| Verification modes | Fingerprint, card, PIN |
| Display | 2.8" TFT |
| Communication | TCP/IP, USB host and client |
| Standard functions | Work code, SMS, DST, scheduled bell, self-service query, automatic status switch, T9 input, photo ID, web server, 9-digit user ID |
| Software | ZKTime.Net 3.0 |
| Power | DC 5 V, 0.8 A |
| Operating temperature | 0 °C to 45 °C |
| Operating humidity | 20% to 80% |
| Dimensions (W × H × D) | 192 × 140 × 42.5 mm |
| Weight | 1.05 kg |
| Installation | Indoor |
ZKTECO SILKFP-101TA Access Control Terminal
13,900.00৳
- Fingerprint time attendance terminal with SilkID sensor
- 3,000 fingerprints, 10,000 EM cards, 100,000 records
- Reads wet, dry and rough fingers accurately
- 2.8" TFT screen; TCP/IP and USB host/client
- Sensor switches on only when a finger is detected
ZKTeco SilkFP-101TA একটি ফিঙ্গারপ্রিন্ট ও কার্ড হাজিরা যন্ত্র। এর SilkID সেন্সর ভেজা, শুকনো বা খসখসে আঙুলও দ্রুত চিনতে পারে। এতে ৩,০০০ আঙুলের ছাপ, ১০,০০০ কার্ড ও ১,০০,০০০ রেকর্ড রাখা যায়। অফিস, কারখানা ও স্কুলে কর্মীদের হাজিরা রাখার জন্য উপযোগী।
Description
The ZKTeco SilkFP-101TA is a fingerprint time attendance terminal built around ZKTeco's SilkID sensor. It identifies wet, dry and rough fingerprints more reliably than standard optical sensors, which suits factories and outdoor workforces where fingers are often dirty or worn.
The terminal stores 3,000 fingerprints, 10,000 EM RFID cards and 100,000 attendance events, and staff can punch in by fingerprint, card or PIN. A 2.8-inch TFT screen guides each punch, and records are collected over TCP/IP or with a USB flash drive. Anti-reflective design and side lighting reduce interference during scanning, and the sensor stays off until a finger is detected to save power.
Standard functions include work codes, SMS, daylight saving, scheduled bell, self-service queries, photo ID and a built-in web server. It works with ZKTime.Net 3.0 software. Shelly International supplies the SilkFP-101TA in Bangladesh with attendance software setup and installation.
Specifications
Specifications
| Model | SilkFP-101TA |
|---|---|
| Fingerprint sensor | SilkID |
| Algorithm | 3D Neuron fingerprint algorithm |
| Fingerprint capacity | 3,000 |
| Card capacity | 10,000 (EM RFID) |
| Record capacity | 100,000 |
| Verification modes | Fingerprint, card, PIN |
| Display | 2.8" TFT |
| Communication | TCP/IP, USB host and client |
| Standard functions | Work code, SMS, DST, scheduled bell, self-service query, automatic status switch, T9 input, photo ID, web server, 9-digit user ID |
| Software | ZKTime.Net 3.0 |
| Power | DC 5 V, 0.8 A |
| Operating temperature | 0 °C to 45 °C |
| Operating humidity | 20% to 80% |
| Dimensions (W × H × D) | 192 × 140 × 42.5 mm |
| Weight | 1.05 kg |
| Installation | Indoor |